Menu
Menu
*Tire comes prefilled with 60 psi of pressure. When handling take caution not to puncture or damage the tire. It is recommended to periodically check your spare tire pressure to maintain it for safe vehicle use*
**Modern Spare does not assume any liability, express or implied for product use. User assumes all liability and responsibility for product use**
First and foremost, THANK YOU for your purchase of our spare tire solution for your vehicle. As fellow car enthusiasts, we have put a great deal of time and energy into delivering a stellar product for your vehicle.
In this kit, you will find everything that you need to quickly and efficiently change a flat tire on your vehicle.
To use, please follow the below steps and read the full instructions prior to beginning:
1. When changing a flat, it is best to do so on stable level ground away from traffic.
2. Apply parking brake and chock wheels.
3. Remove the kit contents from your vehicle. If your kit contains a carrying case, please remove the tire and
wheel from the carrying case. Once the tire and wheel are removed, you will find a zipper pocket in the bottom of
the case. Open the pocket to remove the lug wrench, scissor jack, and disposable tire bag.
4. Most vehicles have 4 different designated lifting points located by the rocker panels near each wheel.
Essentially, it is an opening that allows access to the pinch weld lifting point and should be used to safely lift
the vehicle. Prior to raising the vehicle loosen the lug nuts on the flat tire that you wish to change. Please
align the jacking pad of the scissor jack with the jacking point closest to the tire that you are changing.
Please consult owner’s manual prior to lifting vehicle for complete lifting instructions and/or specific vehicle
lifting procedures. Please see example below:
Please ensure to align the slot on the top of the scissor jack pad with the pinch weld jacking point as shown. To achieve optimal jack stability, the full pinch weld jack point must be within the slot on the scissor jack pad. Failure to do so could place an uneven load on the jack resulting in jack failure.
In addition to these jack placement instructions please ensure that you use the scissor jack on level ground with the vehicle stabilized. Ensure that the vehicle is in park with the parking brake engaged prior to lifting. It is also recommended to chock the wheels to further stabilize the vehicle prior to lifting. Use only approved jacking points as found in your owner’s manual, with the scissor jack base being placed on level solid ground directly beneath the lifting point of the vehicle. Please also check your vehicle owner’s manual for any vehicle specific instructions prior to lifting.
5. Raise vehicle using the ratcheting scissor jack. The ratchet can operate in a clockwise or counterclockwise
direction by using a small switch on the side of the ratchet. Do not place yourself or any part of your
body under the vehicle while being raised or supported by the jack.
6. Completely remove the lug nuts and flat tire. Place flat tire in included disposable bag.
7. Place the Modern Spare wheel and tire on the vehicle using the OEM lug nuts or lug bolts, unless your spare was shipped with an included set of lugs*.
*PLEASE NOTE – Your spare kit may include a new set of lug nuts or lug bolts packaged with the spare wheel and tire. If your kit includes these lug nuts or bolts, please mount the spare using the included nuts or bolts, as the factory lugs may be too large or of a different type for the spare.
If your spare includes a small plastic ring, when installing the spare, place this ring in the center hole on the backside of the spare. This ring will help align the lug holes and make installing the spare a much easier process.
8. Ensure that the lug/bolts nuts are tight and will not come loose (approximately 100-140 ft lbs, please check vehicle owners manual to confirm exact specs).
9. Please note that the included wheel may be a dual PCD wheel, meaning that the wheel has two seperate bolt patterns, totaling 10 different bolt holes. Please align the 5 bolt holes of the wheel that match up with your vehicle’s bolt pattern.
10. Lower vehicle using ratcheting scissor jack, place flat tire and kit contents in your vehicle.
11. On most vehicles, when using a spare tire of any kind, you should turn off your traction control system if equipped while driving. Failure to do so may result in vehicle warning lights. Please consult your vehicle owner’s manual for complete instructions on changing traction control modes or deactivating these systems.
12. The tires used on all Modern Spare spare tire kits have a DOT “M” speed rating. The “M” speed rating designates that the tire is capable of traveling at a constant speed of up to 81 mph. Although the tire is built to this specification, many manufacturers recommend that the narrow space-saving tire is not to exceed 50 mph given the narrow size relative to the regular tires on your vehicle. This is good practice and you should always drive with caution when using a spare tire. Please avoid any speed above 50 mph and only as a means to escape heavy and fast-moving freeway traffic.
Please take caution when driving on a spare. Although it is capable of operating for a long distance it is designed to be used on a temporary basis and does not have the same traction or performance capability of a full size OEM wheel & tire. Should you have any questions regarding your spare tire, please contact us via our website or (801) 896-3395.
(801) 896-3395
(9AM – 5PM M-F MST)
Sales Assistance –sales@modernspare.com
Own a Modern Spare and need Product Support? helpdesk@modernspare.com