Instructions-General-Wheel-Spacer

General Wheel Spacer Instructions

Your Modern Spare Tire Kit came with a wheel spacer. It is used for vehicle models where more clearance is needed over large brake components.

If you own a Tesla, this spacer will be used on the rear wheels and will not be needed on the front. All other vehicles that this spacer is used for will be mounted on the front and will not be needed on the rear.

1. Follow included Installation Instructions to safely raise the car preparing for the removal and install of the spare wheel.

2. Once the factory wheel is removed, set your factory lug nut aside (these will not be used) locate the optional wheel spacer similar to the one shown. (Fig 1.1) Once located, please remove the 5 lug nuts from the threaded studs protruding from the spacer and keep them on hand to use with the wheel.

3. With the spacer’s studs facing away from the car’s hub, place the spacer over the car’s studs.

○ Please Note- Please Note- Modern Spare has supplied you with an additional set of lug nuts that are part of the kit. (These will be a different set than those that came on the spacer).

4. Holding the spacer in place, hand tighten the additional lugs into the spacer holes over the vehicle’s studs, securing the spacer to the wheel hub.

WARNING! Hand-tightened lugs are not adequate for vehicle operation.

5. Once hand tight, use the lug wrench to tighten the lugs down in the traditional cross pattern sequence.

○ *Important Note* Important Note* Some cars may require the front hub/brake rotor to be secured stationary in order to properly tighten the lug bolts used to secure the wheel spacer. To do this, have a helper depress the car’s brake pedal to engage the brakes making the front rotor locked in place while tightening the lugs. OR if alone, insert an object (such as a screwdriver) into the cooling veins of the brake rotor and rotating it until the screwdriver is
locked against the brake caliper.

WARNING!

If an object is used to secure the brake rotor, it must be removed before operating the vehicle, or damage or injury is likely to occur.

For Tesla- you will be using this spacer on the rear. When the vehicle is in “park”, the rear parking brake will be applied and there is no need to depress the brakes.

6. Torque the lug bolts to the same specifications as the factory wheel torque settings. This is normally in 100-140 ft pounds. Please refer to the vehicle owner’s manual for exact torque settings.

7. Once sufficiently tight, place the Modern Spare wheel over the studs protruding from the installed spacer. Please refer to the General Instruction sheet to identify which of the two bolt patterns found on the
Modern Spare wheel is used for your car.

8. Once the wheel is in place, use the lug nuts previously found on the spacer and place them on the spacer studs and hand tighten. Use a lug wrench to tighten the lugs onto the studs in the same cross pattern method used on the spacer, making the wheel secure.

It is recommended to first secure the wheel “snug tight” and then to fully tighten the lug nuts once the vehicle is on the ground and no longer supported by the scissor jack.

9. Torque wheel to same specs as found in step 6.

10. Continue following included spare tire kit installation instructions.

If you have any questions regarding wheel spacer installation, please contact us via our website
(www.modernspare.com) or (801) 896-3395

I could of went with a cheaper spare Tire. Having the Bar, Jack & Spare in one convenient Carry Case is wonderful.

Great product, nicest spare I have ever owned.

This is the second kit I’ve purchased, perfect for a car that comes without a spare. Kit has everything you need for a roadside fix.

Received my tire in excellent condition. Getting registered and installation instructions downloaded. Will definitely recommend this unit to family and friends!

The product is of superior quality. It came in a timely manner and is all it was as advertised and is actually better than expected!

High quality components. Slim profile does not fill up my small trunk. Worth its weight in gold because I no longer have to buy expensive run flat tires. Helpful customer service.

Product was shipped on time.Tire Fit was perfect. Very happy with the tool kit. Would recommend this product.

Looks good. bought for piece of mind after getting a sidewall split at 1200 miles. fits great in the existing yet, empty wheel well of my Honda.

This is a very well packaged product…especially when purchasing the wheel cover carrying case. Everything fits nicely inside the zippered cover ready for when an emergency arises.

Just received and very impressed by the quality of the spare and its accessories. It fit very nice on the Kia but more importantly it looks like it can be used on other models. Very happy so far.

Extremely satisfied

Awesome product. Fits perfect.

Great product. Comes neatly packaged and fits great in the trunk.

Great product, very quick delivery. I will recommend this to my relatives.

Happy to support American small business! Quality spare and accessories. You won’t go wrong in obtaining spare tire kit if your vehicle did not come with one.

Just received my Modern Spare tire for my 2024 Honda CR-V Sport hybrid. Everything seems high-quality, including the carrying case. Obviously (and thankfully) haven't had an opportunity to use it yet, but it already gives me peace of mind.

Great to have a solid spare to count on in my new Tesla Model 3.

Excellent, the tire is more substantial than I expected but it is still lightweight and it fits easily in my small trunk.

Great product quality. I love the spare tire case.

I was impressed by the overall quality of the total kit. The allow wheel was nicely finished, the quality of the tools were top notch and the carrying case was made of rugged materials.

General Wheel Spacer Instructions

CONTACT US

© 2024 Modern Spare. All Rights Reserved.